Starflex - Silver

Poli-Flex Starflex is a holographic effect film coated with a copolyester hotmelt. Poli-Flex Starflex is suitable to transfer onto textiles like cotton, mixtures of polyester/ cotton and polyester/acrylic.

Poli-Flex Starflex can be used for lettering on T-shirts, sport & leisure wear, sport bags and promotional articles.

Poli-Flex Starflex can be cut with all current plotters. We recommend using a standard 45° knife. After weeding the cut flex film is transferred by heat press. The PET liner should be removed cold.

Nylon and textiles with hydrophobic impregnation are not suitable for heat transfer.

Suitable for washing at low temperature (40C) as well as tumble drying.  Always wash textiles inside out.

Guarantee for a secure and long-lasting bond of Poli-Flex Starflex is only given when following the specified temperature and pressure conditions. We recommend evaluation on test material.

Due to the various influences which occur from production and transfer of plotter letterings, consistency of the carrier materials and also washing and cleaning conditions, product liability can only cover the unprocessed material.

Application guidelines

• Apply at 3.5 bar (medium pressure)
• 320F/160C - 15 seconds

Please adjust the application time when using highly structured cotton or cotton mixture fabrics

Please contact your local TCT Graphic Products if you have any additonal questions concerns about this product or its application.