Reflex Nylon

Poly-Flex - Reflex Nylon is a heat transfer film based on a fabric with retro-reflective properties. Due to a special heat sealing adhesive POLI-FLEX® NYLON REFLEX ECO is suitable for the transfer onto Nylon and textiles with hydrophobic impregnation. 

The film consists of metalized microscopic glass beads laminated to a dry heat-reactivating adhesive backing. A transparent, self-adhesive PET liner on the reflective side guarantees that the film can be cut with all current plotters. We recommend using a standard 45° knife. Due to the fabric backing it is possible to cut letterings with a minimum line width of 3 mm.

After weeding the cut flex film is transferred for 3 - 4 seconds by heat press. The PET liner should be removed lukewarm. After cooling down, the material is to be pressed for another 10 - 15 sec. with the same heat and pressure settings.

Reflex Nylon is composed of wide-angle, exposed, retro-reflective lenses. The photometric values conform to EN 471 (class 2).

Suitable for washing at low temperatures (40C).  Hang Dry.  Always wash textiles inside out.

Guarantee for a secure and long-lasting bond of POLI-FLEX® NYLON REFLEX ECO is only given when following the specified temperature and pressure conditions. We recommend evaluation on test material.

Due to the various influences which occur from production and transfer of plotter letterings, consistency of the carrier materials and also washing and cleaning conditions, product liability can only cover the unprocessed material.

Application guidelines

• Apply at 2.0 bar (low pressure)
• 300F/150C - 4 seconds
• Remove liner when lukewarm
• Press again for a further 10 seconds

Please contact your local TCT Graphic Products if you have any additonal questions concerns about this product or its application.